聯系我們

保定市東昊鍛造有限公司

聯系人:黃經理

電話:0312-2200737

手機:13582266002

地址:保定市蓮池區朱莊工業區

行業新聞
鍛件鍛模的檢驗內容
1、鍛模模塊幾何形狀的檢驗
1, the inspection of the geometry of the die module

1)鍛模模塊外形尺寸及基準面、分模面間的相對位置,可用萬能量具進行測量,其尺寸精度及幾何公差應符合圖樣和專用技術條件的規定
1) the dimensions of the die module and the relative position between the base face and the parting surface can be measured by a universal measuring tool. The dimensional accuracy and geometric tolerances should be in accordance with the requirements of the drawings and special technical conditions.

2)將上、下模合上,檢驗角對齊,檢査曲線分模面局部不密合程度和鎖扣間瞭的大小
2) close the upper and lower die, check the angle alignment, check the size of the partial closure of the parting surface of the curve and the size between the fastener.

2、鍛模模膛尺寸的檢驗
2, the test of die size of forging die

1)將檢驗合格的樣板放在模具指定的位置線上,其基準面應與模具分模面緊靠。檢查樣板型面與模具型面的透光間隙,應小于模膛相應尺寸偏差的3/5。
1) put the qualified sample on the specified position line of the mould, and the datum plane should be close to the parting surface of the mold. Check the clearance between the mold surface and the mold surface should be less than 3/5 of the corresponding size deviation.

2)鍛模模膛的某些部位,如腳柱面、圓錐面等,可用標準研具進行著色檢查
2) some parts of forging die cavity, such as pin and cone surface, can be colored by standard tools.

3)由于鍛模樣板不能完全反映模膛的全部尺寸和形狀,可通過澆注樣件(鉛樣或低烙點合金)做進一步檢驗。樣件用萬能量雙測量或劃線檢查,以確定鍛模模膛錯移量和全部幾何尺寸是否符合圖樣要求。
3) as the forging die template can not fully reflect the entire size and shape of the die, it can be further tested by casting samples (lead or low point alloy). The sample is measured with double energy or line marking to determine whether the die shift and all geometric dimensions of the forging die conform to the drawing requirements.
  1. 聯系人:黃經理
  2. 電話:0312-2200737
  3. 手機:13582266002
  4. 網址:www.swtil.tw
  5. 地址:保定市蓮池區朱莊工業區

版權 ? 保定市東昊鍛造有限公司 網址:www.swtil.tw 推薦:模鍛件,精密模鍛件加工,汽車模鍛件,電梯模鍛件  網站制作:保定遨游公司

股票平台跳水 pk10彩票app 陕西快乐十分前三秘诀 新宝6官网下载软件 河北快三走势图十一选五 天津时时结果空 香港6合开奖结果网址 大发快三在线开奖结果 老时时最新开奖数据 新疆喜乐彩开奖信息 山东时时是什么意思是什么意思是什么意思